Yamaha VMX12H Supplementary Service Manual page 192

ENGINE ASSEMBLY AND ADJUSTMENT
2
2
Friction plates and clutch plates installation
steps:
Install the six friction plates (with the
double semi-circular slots) and the six
clutch plates.
NOTE:
Be sure the double semi-circular slots
the friction plate is aligned with the clutch
housing embossed match marks
Install the clutch plate and the friction plate
(with the wide square slot).
NOTE:
Be sure the wide square slot
plate i s aligned with the clutch housing
embossed match marks
If the clutch does not release due to hard
meshing between the friction plates and the
clutch housing, check t o see if any of the
friction plates f i t too snugly into the clutch
housing. Any tight-fitting friction plates
must be repositioned as follows.
1
Remove the friction plates and the clutch
)
plates.
2)
Install the six friction plate (with the
double semi-circular slots) and the six
clutch plates.
NOTE:
Invert the friction plates.
sure the single semi-circular slot
the friction plate is aligned with the clutch
housing embossed match marks
3)
Install 'the clutch plate and the friction
plate (with the wide square slot).
NOTE:
Invert the friction plates.
sure the narrow square slot
friction plate i s aligned with the clutch
housing embossed match marks
on
.
on the friction
on
on the
.
3-68