Yamaha VMX12H Supplementary Service Manual page 211

Reservoir Tank Capacity:
L
0.30 (0.26 Imp
*Hard water or salt water
engine. Y o u may use distilled water
can't get soft water.
not mix more than one t y pe of ethlen
containing corrosion
glycol antifreeze
aluminum engine inhabitors.
Coolant filling steps:
the coolant into the conduit until the
conduit i s full.
*Start the engine (coolant level decreases.)
Always check
coolant leakage before starting engine.
the coolant while engine is running.
*Stop the engine when coolant level stabilizes.
the coolant again to specified level
*Install the radiator cap.
*Align the coolant drain valve "OFF" mark
with the match mark
housing.
11. Connect:
*Feed hose (reservoirtank)
12. Fill:
*Reservoir tank
Add the coolant until liquid reaches
"FULL" level mark.
" F U L L " level
level
0.32 US qt)
qt,
is harmful to the
if
you
for
level, and check for
.
on drain valve
4-4