Yamaha VMX12H Supplementary Service Manual page 41

/ - -
FRONT FORK
6.Install:
Retaining clip
NOTE:
Fit the retaining clip correctly in the groove in
the outer tube.
8.Fill:
Fork oil
(21.8 Imp oz,20.9
Fork oil
filling, slowly pump the fork up
and down to distribute oil.
Oil level:
123 mm (4.8 in)
from the top of inner fork tube
I
fully compressed without spring.
NOTE:
Place the front fork on upright position.
9. Install:
Fork spring
Spring seat
Spacer collar
Cap bolt
NOTE:
Fork spring must be installed with the
smaller pitch upward.
Before installing the cap bolt, apply the
grease to the O-ring.
Temporarily tighten the cap bolt.
-13-
I
US
oz)
10w
or equivalent after
I