Yamaha VMX12H Supplementary Service Manual page 257

FRONT AND REAR BRAKE
Caliper Reassembly
When assembling the caliper, reverse the disas-
sembly procedure. Note the following points.
1. Install:
Brake calipers
Brake hoses
I
25 Nm (2.5 m-kg, 18 ft-lb)
2. Bleed the air completely from the brake
system.
Master Cylinder Reassembly
When assembling the master cylinder, reverse
the disassembly procedure. Note the following
points.
1. Install:
Master cylinder kit
Internal parts should be lubricated with brake
fluid when installed.
2.
Install:
Master cylinders (front and rear)
Brake hoses
Front Master Cylinder:
9 Nm (0.9 m-
Rear Master Cylinder:
23 Nm (2.3 m-kg, 17 ft-lb)
Brake Hose:
25 Nm (2.5 rn-kg, 18 ft-lb)
I
When installing the rear brake hose, align the
brake pipe
the master cylinder.
I
m-kg, 32 ft-lb)
kg, 6.5 ft-lb)
with the front projection
I
on
6-18