Cable Inspection And Lubrication; Centerstand And; Lubrication - Yamaha VMX12H Supplementary Service Manual

CABLE INSPECTION AND LUBRICATION/BRAKE AND CHANGE
PEDALS/BRAKE AND CLUTCH LEVERS LUBRICATION/CENTER-
STAND AND SIDESTAND LUBRICATION/SWINGARM LUBRICATION
2-23

CABLE INSPECTION AND LUBRICATION

Cable inspection and lubrication steps:
*Remove the screws that secure throttle
housing to handlebar.
cable end high and apply several drops
of lubricant to cable.
metal surface of disassembled throttle
twist grip with suitable all-purpose grease to
minimize friction.
for damage to cable insulation.
Replace any corroded or obstructed cables.
*Lubricate any cables that do not operate
.
smoothly
Yamaha Chain and Cable Lube or
SAE 10W30 Motor Oil
BRAKE AND CHANGE PEDALS/BRAKE
AND CLUTCH LEVERS LUBRICATION
Lubricate pivoting parts of each lever and pedal.
Yamaha Chain and Cable Lube
SAE 10W30 Motor Oil
CENTERSTAND AND SIDESTAND

LUBRICATION

Lubricate the centerstand and sidestand at their
pivot points.
Ymaha Chain and Cable Lube or
SAE 10W30 Motor Oil
SWINGARM LUBRICATION
Lubricate the swingarm bearing.
Medium Weight Wheel
Bearing Grease
I
or