Yamaha VMX12H Supplementary Service Manual page 271

FRONT
FORK
3. Tighten:
Bolt (cylinder complete)
Use the Damper Rod Holder
and the T-Handle
Bolt (Cylinder Complete) :
40 Nm (4.0
4. Install:
*Slide bush
outer tube.
Use the Fork Seal Driver Weight
33963) and the Adapter
@inner tube
Outer tube
5.
Install:
spacer
On top of the slide bush
seal
Use the Fork Seal Driver Weight
33963) and the Adapter
and install with numbered side up.
inner tube
Outer tube
6. Install:
Retaining clip
seal
Use the Special Tools
(YM-33963, Y M-33964)
inner tube
Outer tube
7. Fill:
Front fork
Each Fork:
451 (15.9 Imp
Fork Oil
After filling, slowly pump the fork up
and down to distribute oil.
29
(YM-33964).
15.3 US
or equivalent
6-32