Yamaha VMX12H Supplementary Service Manual page 135

3-1 1
1. Remove:
*Crankcase cover (left)
Dowel pins
2. Remove:
*Starter idle
gears
3. Remove:
Bolt (flywheel)
Plain washer
NOTE:
Check for clog of oil passage
If any, clean the oil passage.
4. Remove:
Flywheel
Use the Flywheel Puller (YU-33270)
with the Puller Adapter (YM-33282)
NOTE:
When removing the flywheel, do not allow the
oil baffle plate t o touch the projections
on the flywheel.
in the bolt.
.