Tcr Auto Adjust - Konica Minolta bizhub 164 Service Manual

11. SERVICE MODE
11.7.3

TCR AUTO ADJUST

A. Use
• To make an automatic adjustment of the TCR sensor.
• Used at setup.
• Used when developer has been changed.
• Used when IU has been replaced.
B. Procedure
NOTE
• Before starting this adjustment, the toner bottle must be removed.
1. Press the Menu/Select key to start the adjustment.
1
2. The adjustment sequence automatically stops as soon as the adjustment is made,
and TCR gain value is displayed.
<Conversion formula of TCR gain value to voltage>
TCR control voltage (V) =3.3 x 2 x [TCR gain value] / 256
112
1
Field Service Ver. 2.0 Jun. 2010