Side Guide - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 2.0 Jan. 2008
2.3.8

Side guide

1. Remove the exit tray.
See P.7
2. Remove the front cover.
See P.7
3. Remove the rear cover.
See P.8
[4]
[2]
[3]
[2]
[1]
4. Derail the exit tray support plate
5. Remove three screws [3] and the
[1]
A0D6F2C515DA
6. Pull down the side guide [1] lightly,
[1]
A0D6F2C516DA
NOTE
• In reassembling, ensure of exact
installation with the exit tray home
position detecting lever (rear) [1]
set in the slot of the exit tray home
position detecting lever (center) [2].
• After reassembly, press each of
these levers for several times to
make sure of exact installation.
[2]
A0D6F2C517DA
(front) [1] and the exit tray support
plate (rear) [2] to the outside off the
respective rail grooves.
shoulder screw [4].
disengage the exit tray home posi-
tion detecting lever (rear) [2], and
then remove the side guide [1].
2. Other
11