Punch Unit - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 2.0 Jan. 2008
[4]
2.3.20

Punch unit

1. Remove the punch trash box.
[2]
[2]
[3]
[3]
[2]
[1]
A0D6F2C529DA
[1]
A0D6F2C566DA
[1]
A0D6F2C567DA
4. Shift the shaft assy in the orientation
as shown on the left.
5. Remove the C-clip [1], the gear [2],
the bushing [3], and remove the mid-
dle transport roller [4].
2. Disconnect the connector J1005 [1].
3. Remove the harness from the har-
ness guide [2].
4. Disconnect the connector [1].
5. Remove the screw [2], and remove
the sensor support plate [3].
2. Other
29