2. Other
2.3.6
Upper cover
1. Remove the front cover.
See P.7
2. Remove the rear cover.
See P.8
[1]
[1]
2.3.7
Horizontal transport unit
1. Disconnect and move the finisher away from the main body.
10
A0D6F2C512DA
[2]
A0D6F2C513DA
[3]
[1]
[4]
[2]
A0D6F2C511DA
Field Service Ver. 2.0 Jan. 2008
3. Remove two screws [1].
4. Open the upper door [1], and remove
the upper cover [2].
2. Raise the horizontal transport unit [1]
straight upward and, keeping that
condition, disengage the lock lever
[2] and remove the horizontal trans-
port unit [1].
NOTE
• At reinstallation, be sure to engage
the lock lever [2] in position.
• At reinstallation, make sure that the
gear [3] of the finisher is in positive
mesh with the gear [4] of the hori-
zontal transport unit.