Entrance Motor; Punch Motor; Side Registration Motor - Konica Minolta bizhub C353 Service Manual

2. Other
2.3.24

Entrance motor

1. Remove the middle rear cover.
See P.12
[3]
[4]
[1]
[2]
2.3.25

Punch motor

1. Remove the upper cover.
See P.10
[2]
[1]
2.3.26

Side registration motor

[3]
[3]
[4]
32
2. Remove the harness from the wire
[3]
3. Disconnect the connector [2].
4. Remove two screws [3], remove the
A0D6F2C530DA
2. Remove two screws [1].
3. Disconnect the connector [2], and
[3]
A0D6F2C574DA
1. Disconnect the connector J1001 [1].
2. Remove the harness from the har-
3. Remove two screws [3], and remove
[1]
[2]
A0D6F2C575DA
Field Service Ver. 2.0 Jan. 2008
saddle [1].
entrance motor [4].
remove the punch motor [3].
ness guide [2].
the side registration motor [4].