Delta AH500 series Hardware Manual page 81

 AH04HC-5A
Item
Number of channels
Input
(differential
input)
Input signal
Pulse format
Signal level
Maximum
frequency of
counting
Specifications
Range
Type
Input
(differential
input)
RESET input
Signal level
Maximum
current
Output type
Comparison
output
Signal level
Maximum
current
3 - 5 0
Specifications
4 channels
CH0: X0.8+, X0.8-, X0.9+, and X0.9-
CH1: X0.10+, X0.10-, X0.11+, and X0.11-
CH2: X0.12+, X0.12-, X0.13+, and X0.13-
CH3: X0.14+, X0.14-, X0.15+, and X0.15-
Pulse/Direction (one phase and one input)
Counting up/Counting up (one phase and two inputs)
One time the frequency of A/B-phase inputs (two phases and
two inputs)
Four times the frequency of A/B-phase inputs (two phases and
two inputs)
5~24 V DC
The maximum frequency is 200 kHz.
The number of sampled pulses is within the range between
-200000 and 200000.
The number of accumulated pulses is within the range between
-99999999 and 99999999.
The number of input pulses is within the range between
-2147483648 and 2147483648.
General count
Circular count
CH0: X0.0+ and X0.0-
CH1: X0.1+ and X0.1-
CH2: X0.2+ and X0.2-
CH3: X0.3+ and X0.3-
5~24V DC
15 mA
CH0: The high-speed pulse output Y0.8 is a transistor whose
collector is an open collector.
CH1: The high-speed pulse output Y0.9 is a transistor whose
collector is an open collector.
CH2: The high-speed pulse output Y0.10 is a transistor whose
collector is an open collector.
CH3: The high-speed pulse output Y0.11 is a transistor whose
collector is an open collector.
24 V DC
15 mA
Ch ap te r 3 Pro duc t Spec ifica tions