Delta AH500 series Hardware Manual page 212

Error
Description
code
The setting of the data
exchange for slave 7 in the
16#9A07
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 8 in the
16#9A08
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 9 in the
16#9A09
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 10 in the
16#9A0A
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 11 in the
16#9A0B
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 12 in the
16#9A0C
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 13 in the
16#9A0D
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 14 in the
16#9A0E
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 15 in the
16#9A0F
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 16 in the
16#9A10
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 17 in the
16#9A11
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 18 in the
16#9A12
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 19 in the
16#9A13
PLC Link is incorrect.
(SM1590)
C h ap te r 9 Tro ub les ho o ti ng
Remedy
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
9 - 1 7