Delta AH500 series Hardware Manual page 201

AH5 00 Hardw are Manu al
Error
Description
code
An error occurs when the
binary number is converted
16#200D
into the binary-coded decimal
number. (SM0/SM5)
The string does not end with
16#200E
0x00. (SM0/SM5)
The instruction does not
16#200F support the modification by an
index register. (SM5)
1. The instruction does not
support the device.
2. Encoding error
16#2010
3. The instruction is a 16-bit
instruction, but the constant
operand is a 32-bit code.
(SM5)
The number of operands is
16#2011
incorrect. (SM5)
Incorrect division operation
16#2012
(SM0/SM5).
The value exceeds the range
of values which can be
16#2013 represented by the
floating-point numbers.
(SM0/SM5)
The task designated by
16#2014 TKON/YKOFF is incorrect, or
exceeds the range. (SM5)
There are more than 32 levels
16#2015 of nested program structures
supported by CALL. (SM0)
There are more than 32 levels
of nested program structures
16#2016
supported by FOR/NEXT.
(SM0/SM5)
The number of times FOR is
used is different from the
16#2017
number of times NEXT is
used. (SM5)
There is a label after FEND,
but there is no SRET.
16#2018
There is SRET, but there is no
label. (SM5)
The interrupt task is not after
16#2019
FEND. (SM5)
IRET/SRET is not after FEND.
16#201A
(SM5)
9 - 6
Remedy
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again,
and download the program again.
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again,
and download the program again.
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again,
and download the program again.