Delta AH500 series Hardware Manual page 213

AH5 00 Hardw are Manu al
Error
Description
code
The setting of the data
exchange for slave 20 in the
16#9A14
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 21 in the
16#9A15
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 22 in the
16#9A16
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 23 in the
16#9A17
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 24 in the
16#9A18
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 25 in the
16#9A19
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 26 in the
16#9A1A
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 27 in the
16#9A1B
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 28 in the
16#9A1C
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 29 in the
16#9A1D
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 30 in the
16#9A1E
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 31 in the
16#9A1F
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 32 in the
16#9A20
PLC Link is incorrect.
(SM1590)
9 - 1 8
Remedy
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.