Specifications For Network Modules; General Specifications - Delta AH500 series Hardware Manual

3.8 Specifications for Network Modules

3.8.1 General Specifications

 AH10SCM-5A
Item
Connector type
Transmission
interface
Transmission
speed
Communication
format
Communication
protocol
Electric energy
consumption
Insulation voltage 2,500 V DC
 AH10EN-5A
Item
Connector type
Transmission
interface
Transmission
cable
Transmission
speed
Communication
protocol
Electric energy
consumption
Insulation voltage 2,500 V DC
 AH10DNET-5A
Item
Communication
type
Electrical
isolation
Connector type
Data type
Communication
speed
Communication
cable
3 - 4 2
European-style removable terminal block
RS-485⁄RS-422
1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 76,800, 115,200,
230,400, and 460,800 bps
Stop bit: 1 bit and 2 bits
Parity bit: none, an odd parity bit, and an even parity bit
Data bit: 7 bits and 8 bits
Modbus ASCII/RTU
UD Link
BACnet MS/TP slave
1.5 W
RJ-45 with auto-MDI/MDIX
802.3 and 802.3u
Category 5e cable
The maximum length is 100 meters.
10/100 Mbps auto-detection
ICMP, IP, TCP, UDP, DHCP, NTP, Modbus TCP, HTTP, SNMP, and
SMTP
1.5 W
CAN
500 V DC
Removable connector (5.08 mm)
I/O polled, and explicit
Standard mode: 125 kbps, 250 kbps, and 500 kbps
Extended mode: 10 kbps, 20 kbps, 50 kbps, 125 kbps, 250 kbps,
kbps, 800 kbps, and 1 Mbps
Delta shielded twisted pair
(Two communication cables, two power cables, and one shielded cable)
Ch ap te r 3 Pro duc t Spec ifica tions
Specifications
Specifications
Specifications
500