Profiles - Delta AH500 series Hardware Manual

AH5 00 Hardw are Manu al

3.10.2 Profiles

 AHRTU-DNET-5A
1
2
1
x10
3
N od e A ddr e ss
0
x10
D R 1
4
D R 0
IN 1
IN 0
5
Number Name
1 Model name
Seven-segment
2
display
3 Address knob
4 Function switch
5 DeviceNet connector
6 MS LED indicator
7 NS LED indicator
8 Label
9 Set screw
10 Connector
11 Projection
 The address knobs
It is used to set the node address of AHRTU-DNET-5A on a DeviceNet network. (Node
addresses range from 0 to 63.)
Setting
Available nodes on a DeviceNet
0...63
network
Unavailable nodes on a
64...99
DeviceNet network
Example: If users want to set the communication address of AHRTU-DNET-5A to 26, they can
turn the knob corresponding to x10
6.
Note:
1. When the power supply is cut off, the node address is set. After the setting of the node
address is complete, AHRTU-DNET-5A can be supplied with power.
2. If AHRTU-DNET-5A is running, changing the node address is unavailable.
3. Please use a slotted screwdriver to turn the knobs with care, and do not scrape them.
6
7
8
Model name of the module
Display
Setting the address
Setting the functions
DeviceNet is used to interconnect control devices for data
exchange.
Indicating the status of the module
Indicating the status of the network
Nameplate
Fixing the module
Connecting the module and a backplane
Fixing the module
Description
1
to 2, and turn the knob corresponding to x10
10
Description
9
11
0
to
3 - 7 1