Delta AH500 series Hardware Manual page 211

AH5 00 Hardw are Manu al
Error
Description
code
The CPU parameter
downloaded is incorrect.
16#8216
The interval of executing
interrupt 1 is set incorrectly.
The CPU parameter
downloaded is incorrect.
16#8217
The interval of executing
interrupt 2 is set incorrectly.
The CPU parameter
downloaded is incorrect.
16#8218
The interval of executing
interrupt 3 is set incorrectly.
The CPU parameter
downloaded is incorrect.
16#8219
The watchdog timer is set
incorrectly.
The CPU parameter
downloaded is incorrect.
16#821A
The setting of the scan time is
incorrect.
The CPU parameter
downloaded is incorrect.
16#821B
The setting of the remote
execution function is incorrect.
The CPU parameter
downloaded is incorrect.
16#821D
An error occurs in the latched
area.
The setting of the data
exchange for slave 1 in the
16#9A01
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 2 in the
16#9A02
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 3 in the
16#9A03
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 4 in the
16#9A04
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 5 in the
16#9A05
PLC Link is incorrect.
(SM1590)
The setting of the data
exchange for slave 6 in the
16#9A06
PLC Link is incorrect.
(SM1590)
9 - 1 6
Remedy
1. Check the setting of the basic parameter for the
CPU module in HWCONFIG.
2. Check whether the version of HWCONFIG used
now is compatible with the version of the CPU.
1. Check the setting of the basic parameter for the
CPU module in HWCONFIG.
2. Check whether the version of HWCONFIG used
now is compatible with the version of the CPU.
1. Check the setting of the basic parameter for the
CPU module in HWCONFIG.
2. Check whether the version of HWCONFIG used
now is compatible with the version of the CPU.
1. Check the setting of the basic parameter for the
CPU module in HWCONFIG.
2. Check whether the version of HWCONFIG used
now is compatible with the version of the CPU.
1. Check the setting of the basic parameter for the
CPU module in HWCONFIG.
2. Check whether the version of HWCONFIG used
now is compatible with the version of the CPU.
1. Check the setting of the basic parameter for the
CPU module in HWCONFIG.
2. Check whether the version of HWCONFIG used
now is compatible with the version of the CPU.
1. Check the setting of the basic parameter for the
CPU module in HWCONFIG.
2. Check whether the version of HWCONFIG used
now is compatible with the version of the CPU.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.
1. Check the program and the related special data
registers.
2. Set the PLC Link parameter in HWCONFIG
again.