Delta AH500 series Hardware Manual page 208

Error
Description
code
The device which receives the
16#6206 data in the TCP socket function
is illegal.
The received data length set in
16#6207
the TCP socket function is
illegal.
The data which is received
16#6208 through the TCP socket
exceeds the device range.
The local communication port
16#620A set in the UDP socket function
is illegal.
The remote communication
16#620B port set in the UDP socket
function is illegal.
The device from which the data
16#620C is sent in the UDP socket
function is illegal.
The transmitted data length set
16#620D in the UDP socket function is
illegal.
The data which is sent through
16#620E the UDP socket exceeds the
device range.
The device which receives the
16#620F data in the UDP socket function
is illegal.
The received data length set in
16#6210 the UDP socket function is
illegal.
The data which is received
16#6211 through the UDP socket
exceeds the device range.
There is no response from the
16#6212 remote device after the timeout
period.
The data received exceeds the
16#6213
limit.
C h ap te r 9 Tro ub les ho o ti ng
Remedy
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
Make sure that the remote device is connected.
1. Check the program and the related special data
registers.
2. Set the Ethernet parameter for the CPU module
in HWCONFIG again.
9 - 1 3