Delta AH500 series Hardware Manual page 200

Error
Description
code
The capacity of the memory
16#0061 card is not large enough.
(SM453)
The memory card is write
16#0062
protected. (SM453)
An error occurs when the data
16#0063 is written into the memory
card. (SM453)
The file in the memory card
16#0064
can not be read. (SM453)
The file in the memory card is
16#0065
a read-only file. (SM453)
An error occurs when the
16#0066
system is backupped.
There is no END in the
16#2000
program in the PLC. (SM5)
GOEND is used incorrectly.
16#2002
(SM5)
The devices used in the
16#2003 program exceed the range.
(SM0/SM5)
The part of the program
specified by the label used in
16#2004 CJ/JMP is incorrect, or the
label is used repeatedly.
(SM0/SM5)
The N value used in MC is not
the same as the
corresponding N value used
16#2005 in MCR, or the number of N
values used in MC is not the
same as the number of N
values used in MCR. (SM5)
The N values used in MC do
not start from 0, or the N
16#2006
values used in MC are not
continuous. (SM5)
The operands used in ZRST
16#2007
are not used properly. (SM5)
16#200A Invalid instruction (SM5)
The operand n or the other
16#200B constant operands exceed the
range. (SM0/SM5)
The operands overlap.
16#200C
(SM0/SM5)
C h ap te r 9 Tro ub les ho o ti ng
Remedy
Check whether the capacity of the memory card is
large enough.
Check whether the memory card is write protected.
Check whether the file path is correct, or whether
the memory card breaks down.
Check whether the file path is correct, or whether
the file is damaged.
Users need to set the file so that the file is not a
read-only file.
1. Check whether the memory card is normal, and
whether the capacity of the memory card is large
enough.
2. Retry the backup procedure. If the error still
occurs, please contact the factory.
1. Compile the program again, and download the
program again.
2. Reinstall ISPSoft, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
Check the program, compile the program again,
and download the program again.
9 - 5