Delta AH500 series Hardware Manual page 25

AH5 00 Hardw are Manu al
nut according to the actual condition of the plane unless there are specific specifications for a
screw which are indicated in the pictures below.
1. Tighten the M5 screws in the holes indicated by a.
a
2. Tighten the two screws in the holes indicated by b.
Installing a DIN Rail
1. The installation is applicable to a 35 millimeter DIN rail.
2. Install the mounting clips on a backplane.
3. Install the backplane on a DIN rail.
Step 1: Pull the clasp in the direction indicated by the arrow.
Step 2: Hang the backplane on a DIN rail.
Step 3: Press the clasp.
2 - 1 0
a
b
a