Advertisement
2 | SAFETY PRECAUTIONS
1.
SAFETY PRECAUTIONS
• Read the safety precautions carefully prior to installation.
• Stated below are important safety issues that must be followed.
• After completing the installation, ensure the unit operates correctly
during start-up operation. Please instruct the customer on how to
operate the unit and keep it maintained. Also, inform customers that
they should store this installation manual along with the owner's
manual for future reference.
WARNING
Failure to observe a warning may result in serious injury
or damage.
CAUTION
Failure to observe a caution may result in injury or
damage to the equipment.
WARNING
Installation of this unit must be in accordance with this
installation manual.
This unit must only be installed, serviced and maintained by
trained and qualified personnel.
6 720 862 462 (2017/05)
FAULT ALARM
INSTALLATION AND OPERATION MANUAL
ODU-FA
2.
OTHER PRECAUTIONS
Installation Location
Preparation before installation
1. Prior to installation, check the following accessories are complete.
Name
1
Fault Alarm
Self tapping screws
2
Self tapping screws
3
Wall plugs
4
Fault Alarm installation
5
and operating manual
2. Prepare the following assemblies on the site.
Name
Qty
1
Electrical power
supply
2
Electrical appliance
used with fault alarm
3
Wiring conduit
1
4
Shielded 3-core
2
PE cable
Installation Notice
1. Communication cables are low voltage and must not be connected
to a mains electrical power supply. Communication cables must also
be kept away from mains electrical cables to avoid interference.
2. The shielded layer of the shielded cable must be terminated to
ground.
3. The communication wiring supplying the fault alarm must be
continuous without connections.
4. Do not use a Megger to test the communication wiring.
Qty.
Remarks
1
ODU-FA
ST3.9×25 (for mounting the
4
unit to a wall)
M4×20 (for mounting the
4
unit to a wall)
(for mounting the unit to a
4
wall)
1
Specification
Remark
( Only for
reference )
AC198-242V
Input power
2*0.75mm²
AC198-242V
Sepcification
Max.current 3.15A
AC198-242V
Insulated
Secured to wall
sleeve
RVVP Series
For communication
cabling
CLIMATE 5000 VRF
Advertisement
