Startup Script; Adding A Startup Script - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

Startup script

You can add a startup script on the codec
to execute certain commands from the API
during boot up.
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration

Adding a startup script

The startup script can be used to execute certain commands
from the API during boot up. To enable this feature one must
log in to the codec as root and follow the below points.
Login to the codec
1. Connect to the codec through the network, using a
command line interface (ssh, telnet or scp) and login as
root
2. Make a user directory using the following command:
"mkdir /user/scripts.d"
3. Put an executable file (permission must be changed to
executable) in this directory.
Example of the text in such a file:
#!/usr/bin/env tsh
xCommand Audio LocalInput Update InputId: 1 MixerMode:Fixed
The startup script file
•
The file must start with the following sequence:
#!/usr/bin/env tsh
•
The file can contain any xCommand or xConfiguration
command
•
The system will execute the commands/configurations in
sequence.
•
The file can have any name as long as it is placed in this
directory.
•
For multiple commands you must use Unix end of line
(LF). Windows end of line will not work.
xCommand
171
API Reference Guide
xStatus Appendices Appendices
www.cisco.com