About Xfeedback - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

About xFeedback

The xFeedback is a powerful feature on the Codec C90/C60/
C40. It lets you subscribe to what you want to be notified about
when changes occur on the system
•
This can be configuration changes like someone changes
the name of the system.
•
It might be events like key press from the remote control.
•
Or it can be changes to the state of the system, like a call
connecting or disconnecting.
The xFeedback command is used to specify what parts of the
configuration and status hierarchies to monitor, and will only be
issued on the RS-232/Telnet/SSH for which it is specified.
If connecting to the codec with multiple sessions, each session
can define feedback individually.
CAUTION: We discourage registering all status changes as
this may give too much feedback information than the control
systems are able to handle.
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API About the API xConfiguration
xFeedback ?
xFeedback help:
xFeedback Register XPathExpression
xFeedback Deregister XPathExpression
xFeedback List
xFeedback Help
Example with xFeedback
xFeedback register Status/Audio
xFeedback register Configuration/Video
xFeedback register Event
xFeedback list
xFeedback deregister Event
xFeedback list
23
xCommand xStatus
- Registers feedback on expression XPathExpression
- Deregisters feedback if resistered on XPathExpression
- Generate list of currently registered XPathExpressions
- Display this help text
API Reference Guide
Appendices
www.cisco.com