Xstatus Video Layout; Xstatus Video Layout Presentationview; Xstatus Video Layout Site [1; Xstatus Video Output Legacy [5] Resolution Refreshrate - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

xStatus Video Output Legacy [5] Resolution RefreshRate

Shows the resolution refresh rate (Hz) for the video output Legacy (Composite).
Value space of the result returned:
<1..300>
Example:
xStatus Video Output Legacy 5 Resolution RefreshRate
*s Video Output Legacy 5 Resolution RefreshRate: 60
** end

xStatus Video Layout

Shows the top level overview of the video status.
Example:
xStatus Video Layout
*s Video Layout PresentationView: "full"
*s Video Layout Site 1 Output 1 FamilyName: "speaker"
*s Video Layout Site 1 Output 1 FullFamilyName: "speaker-sv-on"
*s Video Layout Site 1 Output 1 FamilyNumber: 1027
*s Video Layout Site 1 Output 1 GraphicName: "1top-1small"
*s Video Layout Site 1 Output 1 GraphicNumber: 1017
*s Video Layout Site 1 Output 1 Descriptor: 4
*s Video Layout Site 1 Output 1 DescriptorOutput: 1
*s Video Layout Site 1 Output 1 Frame 1 PositionX: 1333
*s Video Layout Site 1 Output 1 Frame 1 PositionY: 59
*s Video Layout Site 1 Output 1 Frame 1 Width: 7334
*s Video Layout Site 1 Output 1 Frame 1 Height: 7334
*s Video Layout Site 1 Output 1 Frame 1 Layer: 1
*s Video Layout Site 1 Output 1 Frame 1 VideoSourceType: "site"
*s Video Layout Site 1 Output 1 Frame 1 VideoSourceId: 27
*s Video Layout Site 1 Output 1 Frame 1 InputNumber: 1
*s Video Layout Site 1 Output 1 Frame 1 Filename: ""
-
- continues with the video layout status for the Sites [1..n], Outputs [1..n]
and Frames [1..n].
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration

xStatus Video Layout PresentationView

xStatus Video Layout Site [1..n] Output [1..5] FamilyName
xStatus Video Layout Site [1..n] Output [1..5] FullFamilyName
xStatus Video Layout Site [1..n] Output [1..5] FamilyNumber
160
xCommand
Returns information about the presentation view mode.
Value space of the result returned:
<Default/Maximized/Minimized>
Example:
xStatus Video Layout PresentationView
*s Video Layout PresentationView: "Default"
** end
Shows the name of the video layout family.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus Video Layout Site 1 Output 1 FamilyName
*s Video Layout Site 1 Output 1 FamilyName: "fullscreen"
** end
Shows the name, included information about selfview on/off, for the video layout family.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus Video Layout Site 1 Output 1 FullFamilyName
*s Video Layout Site 1 Output 1 FullFamilyName: "fullscreen-local-single-
camctrl"
** end
Shows the number of the video layout family. The number identifies the layout family of the specified
output.
Value space of the result returned:
<Integer value>
Example:
xStatus Video Layout Site 1 Output 1 FamilyNumber
*s Video Layout Site 1 Output 1 FamilyNumber: 1014
** end
API Reference Guide
xStatus xStatus Appendices
www.cisco.com