Xcommand Phonebook Contact Add; Xcommand Phonebook Folder Delete - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

xCommand Phonebook Folder Delete

Delete an existing folder from the local phonebook.
FolderId: A unique identifier for the folder, which was created when the xCommand Phonebook Folder
Add command was issued.
Requires user role: ADMIN
Parameters:
FolderId(r): <S: 0, 255>
Example:
xCommand Phonebook Folder Delete FolderId:localGroupId-3
OK
*r PhonebookFolderDeleteResult (status=OK):
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration

xCommand Phonebook Contact Add

94
xCommand xCommand
Add new contact to the local phonebook. Stored internally in the system. Returns the ContactId
(Name: localContactId-1), which is a unique Id of the contact.
Name: The name of the contact.
FolderId: A unique identifier for the folder, which was created when the xCommand Phonebook Folder
Add command was issued.
ImageURL: The URL to an image.
Title: The title of the contact.
Number: The phone number or address of the contact.
Protocol: Select H323 or SIP protocol.
CallRate: Set a call rate.
Device: Select the device type.
Requires user role: ADMIN
Parameters:
Name(r): <S: 0, 255>
FolderId: <S: 0, 255>
ImageURL: <S: 0, 255>
Title: <S: 0, 255>
Number: <S: 0, 255>
Protocol: <H323/SIP>
CallRate: <0..65534>
Device: <Mobile/Other/Telephone/Video>
Example:
xCommand Phonebook Contact Add Name: "John Doe" Number:12345
OK
*r PhonebookContactAddResult (status=OK):
Name: localContactId-1
** end
API Reference Guide
xStatus Appendices
www.cisco.com