Cisco TelePresence System Codec C90 Reference Manual page 128

Cisco TelePresence System Codec C90
Contents Introduction
The GPIO status
xStatus GPIO Pin [1..4] State
Shows the current state of each GPIO pin. The default state is High (+12V). When activated the state
is Low (0V).
Value space of the result returned:
<High/Low>
Example:
xStatus GPIO Pin 1 State
*s GPIO Pin 1 State: High
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration
The H323 status
xStatus H323
xStatus H323 Gatekeeper Status
xStatus H323 Gatekeeper Address
xStatus H323 Gatekeeper Port
128
xCommand
Shows the top level overview of the H323 status.
Example:
xStatus H323
*s H323 Gatekeeper Status: Registered
*s H323 Gatekeeper Address: "192.0.1.20"
*s H323 Gatekeeper Port: 1719
*s H323 Gatekeeper Reason: ""
** end
Shows the gatekeeper registration status.
Value space of the result returned:
<Registered/Inactive/Rejected>
Example:
xStatus H323 Gatekeeper Status
*s H323 Gatekeeper Status: Registered
** end
Displays the IP address of the gatekeeper where the system is registered.
Value space of the result returned:
<S: 0, 100>
Example:
xStatus H323 Gatekeeper Address
*s H323 Gatekeeper Address: "192.0.1.20"
** end
Shows the port which is used when connecting to on the gatekeeper.
Value space of the result returned:
<Integer value>
Example:
xStatus H323 Gatekeeper Port
*s H323 Gatekeeper Port: 1719
** end
API Reference Guide
xStatus xStatus Appendices
www.cisco.com