Xcommand Experimental Audio Localoutput Mute; Xcommand Experimental Audio Localoutput Unmute; Xcommand Experimental Audio Remoteinput Unmute; Xcommand Experimental Audio Remoteoutput Mute - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

xCommand Experimental Audio RemoteInput Unmute

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Unmute the remote audio input.
Requires user role: ADMIN
Parameters:
CallId(r): <0..65534>
Example:
xCommand Experimental Audio RemoteInput Unmute CallID:1
*r AudioRemoteInputUnmuteResult (status=OK):
** end

xCommand Experimental Audio RemoteOutput Mute

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Mute the remote audio output.
Requires user role: ADMIN
Parameters:
CallId(r): <0..65534>
Example:
xCommand Experimental Audio RemoteOutput Mute CallID:1
*r AudioRemoteOutputMuteResult (status=OK):
** end

xCommand Experimental Audio RemoteOutput Unmute

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Unmute the remote audio output.
Requires user role: ADMIN
Parameters:
CallId(r): <0..65534>
Example:
xCommand Experimental Audio RemoteOutput Unmute CallID:1
*r AudioRemoteOutputUnmuteResult (status=OK):
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration

xCommand Experimental Audio LocalOutput Mute

xCommand Experimental Audio LocalOutput Unmute

xCommand Experimental Audio StereoEchoCancellation

109
xCommand xCommand
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Mute the remote local output.
Requires user role: ADMIN
Parameters:
ConferenceId(r): <0..65534>
Example:
xCommand Experimental Audio LocalOutput Mute ConferenceID:1
*r AudioLocalOutputMuteResult (status=OK):
** end
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Unmute the remote local output.
Requires user role: ADMIN
Parameters:
ConferenceId(r): <0..65534>
Example:
xCommand Experimental Audio LocalOutput Unmute ConferenceID:1
*r AudioLocalOutputUnmuteResult (status=OK):
** end
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Turn on/off the stereo echo cancellation.
Requires user role: ADMIN
Parameters:
Mode(r): <On/Off>
Example:
xCommand Experimental Audio StereoEchoCancellation Mode: Off
*r AudioStereoEchoCancellationModeResult (status=OK):
** end
API Reference Guide
xStatus Appendices
www.cisco.com