Xconfiguration Experimental Systemunit Controller Address; Xconfiguration Experimental Systemunit Crashreporting Mode; Xconfiguration Experimental Systemunit Crashreporting Uri - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

xConfiguration Experimental SystemUnit CrashReporting Mode

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Off/On>
Example: xConfiguration Experimental SystemUnit CrashReporting Mode: Off

xConfiguration Experimental SystemUnit CrashReporting URI

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
Requires user role:
<S: 0, 255>
Value space:
Example: xConfiguration Experimental SystemUnit CrashReporting URI: ""

xConfiguration Experimental SystemUnit Controller Address

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
Requires user role:
<S: 0, 255>
Value space:
xConfiguration Experimental SystemUnit Controller Address: ""
Example:
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration xConfiguration
69
xCommand xStatus
API Reference Guide
Appendices
www.cisco.com