Xstatus Mediachannels Call [1 - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction
xStatus MediaChannels Call [1..n] IncomingVideoChannel [1..n] Transport RTCP Local
Port
Shows the local UDP port number of the Real-time Transport Control Protocol (RTCP) port for the
incoming video in the media channel.
Value space of the result returned:
<1..n>
Example:
xStatus MediaChannels Call 27 IncomingVideoChannel 330 Transport RTCP Local
Port
*s MediaChannels Call 27 IncomingVideoChannel 330 Transport RTCP Local Port:
16405
** end
xStatus MediaChannels Call [1..n] IncomingVideoChannel [1..n] Transport RTCP Remote
IpAddress
Shows the remote IP address of the Real-time Transport Control Protocol (RTCP) port for the
incoming video in the media channel..
Value space of the result returned:
<S: 0, 255>
Example:
xStatus MediaChannels Call 27 IncomingVideoChannel 330 Transport RTCP
Remote IpAddress
*s MediaChannels Call 27 IncomingVideoChannel 330 Transport RTCP Remote
IpAddress: "192.168.136.130"
** end
xStatus MediaChannels Call [1..n] IncomingVideoChannel [1..n] Transport RCTP Remote
Port
Shows the remote UDP port number of the Real-time Transport Control Protocol (RTCP) port for the
incoming video in the media channel.
Value space of the result returned:
<1..n>
Example:
xStatus MediaChannels Call 27 IncomingVideoChannel 330 Transport RTCP
Remote Port
*s MediaChannels Call 27 IncomingVideoChannel 330 Transport RTCP Remote
Port: 50933
** end
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration
xStatus MediaChannels Call [1..n] OutgoingAudioChannel [1..n] Encryption Status
xStatus MediaChannels Call [1..n] OutgoingAudioChannel [1..n] Audio Protocol
xStatus MediaChannels Call [1..n] OutgoingAudioChannel [1..n] Audio Channels
136
xCommand
Shows the encryption status on the outgoing channel.
Value space of the result returned:
<On/Off>
Example:
xStatus MediaChannels Call 27 OutgoingAudioChannel 328 Encryption Status
*s MediaChannels Call 27 OutgoingAudioChannel 328 Encryption Status: Off
** end
Shows the audio algorithm for the outgoing audio channel.
AACLD: The AAC-LD is a MPEG-4 Low Delay Audio Coder audio compression format.
G722: The G.722 algorithm is an ITU standard.
G7221: The G.722.1 algorithm is a licensed royalty-free ITU-T standard.
G711Mu: The G.711 Mu-law compression algorithm is used in North America and Japan.
G711A: The G.711 A-law compression algorithm is used in Europe and the rest of the world
Value space of the result returned:
<AACLD/G722/G7221/G711Mu/G711A>
Example:
xStatus MediaChannels Call 27 OutgoingAudioChannel 328 Audio Protocol
*s MediaChannels Call 27 OutgoingAudioChannel 328 Audio Protocol: AACLD
** end
Shows the number of outgoing audio channels.
Value space of the result returned:
<Integer value>
Example:
xStatus MediaChannels Call 27 OutgoingAudioChannel 328 Audio Channels
*s MediaChannels Call 27 OutgoingAudioChannel 328 Audio Channels: 1
** end
API Reference Guide
xStatus xStatus Appendices
www.cisco.com