The Experimental Configuration; Xconfiguration Experimental Audio Ecreferencedelay; Xconfiguration Experimental Audio Input Microphone [1..8] Echocontrol Highpassfilter; Xconfiguration Experimental Audio Panning Maxangle - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

The Experimental configuration

The Experimental settings are beta preview features and can be used 'as is'. They are not fully
documented.
NOTE: The Experimental settings are likely to change without further notice.

xConfiguration Experimental Audio Panning Mode

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
Requires user role:
<Off/Auto>
Value space:
Example: xConfiguration Experimental Audio Panning Mode: Off

xConfiguration Experimental Audio Panning MaxAngle

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
Requires user role:
<0..90>
Value space:
xConfiguration Experimental Audio Panning MaxAngle: 0
Example:

xConfiguration Experimental Audio Panning MonitorLeft

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Example: xConfiguration Experimental Audio Panning MonitorLeft: 1

xConfiguration Experimental Audio Panning MonitorRight

NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <1/2/3/4/5>
Example: xConfiguration Experimental Audio Panning MonitorRight: 1
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration xConfiguration

xConfiguration Experimental Audio EcReferenceDelay

xConfiguration Experimental Audio Input Microphone [1..8] EchoControl HighPassFilter

xConfiguration Experimental Audio Input Microphone [1..8] EchoControl
ResidualEchoMasking
xConfiguration Experimental Audio Input Microphone [1..8] Channel
65
xCommand
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <0..300>
Example: xConfiguration Experimental Audio EcReferenceDelay: 0
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
ADMIN
Requires user role:
<On/Off>
Value space:
Example: xConfiguration Experimental Audio Input Microphone 1 EchoControl
HighPassFilter: Off
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Requires user role: ADMIN
Value space: <Normal/Aggressive>
Example: xConfiguration Experimental Audio Input Microphone 1 EchoControl
ResidualEchoMasking: Normal
NOTE: This Experimental command can be used 'as is' and will not be further documented. The
Experimental settings WILL change.
Define whether the microphone connector is a mono signal or part of a multichannel signal.
Requires user role: ADMIN
Value space: <Left/Right/Mono>
Left: The microphone signal is the left channel of a stereo signal.
Right: The microphone signal is the right channel of a stereo signal.
Mono: The microphone signal is a mono signal.
Example: xConfiguration Experimental Audio Input Microphone 1 Channel: Mono
API Reference Guide
xStatus Appendices
www.cisco.com