Table 43. Bios Setup Ide Configuration Menu Options - Intel SE7520AF2 Technical Product Specification

System BIOS
Feature
Processor Retest
5.11.5.1.3 IDE Configuration Sub-Menu
Feature
Onboard P-ATA Disabled
Channels
Primary
Onboard S-ATA Disabled
Channels
Enabled
Configure S-ATA as
Disabled
RAID
Enabled
S-ATA Mode Enhanced
Legacy
Primary IDE Master [Device Details]
Primary IDE Slave [Device Details]
Secondary IDE [Device Details]
Master
124
Options
Enabled
Disabled

Table 43. BIOS Setup IDE Configuration Menu Options

Options
Disabled: disables the
integrated P-ATA controller.
Primary: enables only the
primary P-ATA controller.
Disabled: disables the
integrated SATA controller.
Enabled: enables the integrated
SATA controller.
When enabled the SATA
channels are reserved to be
used as RAID.
Legacy mode allows installation
of legacy operating systems
that do not support Enhanced
Mode by allowing the user to
emulate the ICH5-R S-ATA
ports (S-ATA A1/A2) as P-ATA
devices.
While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
While entering setup, BIOS auto
detects the presence of IDE
devices. This displays the
status of auto detection of IDE
devices.
Intel order number C77866-003
Intel® Server Board SE7520AF2 TPS
Help Text
If enabled, all processors will
be activated and retested on
the next boot. This option will
be automatically reset to
disabled on the next boot.
Help Text
Description
Rearms the processor sensors.
Only displayed if the Intel
Management Module is
present.
Description
Controls state of integrated P-
ATA controller.
Controls state of integrated SATA
controller.
When Enabled, S-ATA Mode is
grayed out since the system is in
Enhanced mode.
When in Legacy Mode and P-
ATA Channels is set to Primary,
the S-ATA A1 emulates
Secondary Master, and S-ATA A2
emulates Secondary Slave (A1-
Sec M/A2-Sec S)
When in Legacy Mode and P-
ATA Channels is set to Disabled,
the S-ATA A1 emulates Primary
Master, and S-ATA A2 emulates
Secondary Master (A1-Pri M/A2-
Sec M)
Selects submenu with additional
device details.
Selects submenu with additional
device details.
Selects submenu with additional
device details. Option displayed
grayed out and listing 'Not
Detected' when in Enhanced
Mode. In Legacy Mode the S-
ATA devices will be displayed
here.
Revision 1.2