Table 58. Bios Setup, Server Menu Selections - Intel SE7520AF2 Technical Product Specification

System BIOS
Secure Mode Boot
Disabled
Enabled
Power Switch Inhibit Disabled
Enabled
Reset Switch Inhibit
Disabled
Enabled
NMI Control Disabled
Enabled
5.11.5.5 Server menu
Feature
System management
Serial Console Features
Event Log configuration
Assert NMI on SERR
Assert NMI on PERR
AC Link
Platform Event Filtering
FRB-2 Policy
134
When enabled, allows the host
system to complete the boot
process without a password. The
keyboard will remain locked until a
password is entered. A password
is required to boot from diskette.
Disable the Front Panel Power
Switch when Secure mode is
activated. A password is required
to unlock the system.
Disable the Front Panel Reset
Switch when Secure mode is
activated. A password is required
to unlock the system.
Enable / disable NMI control for
the front panel NMI button.

Table 58. BIOS Setup, Server Menu Selections

Options
N/A N/A
N/A N/A
N/A Configures event logging.
Disabled If enabled, NMI is generated on
SERR and logged.
Enabled
Disabled If enabled, NMI is generated.
SERR option needs to be
Enabled
enabled to activate this option.
Stays Off Determines the mode of
operation if a power loss occurs.
Power On
Stays off, the system will remain
Last State
off once power is restored. Power
On, boots the system after power
is restored.
Enabled Disable trigger for system sensor
events.
Disabled
Disable BSP This controls action if the boot
processor will be disabled or not.
Do not disable BSP
Retry on Next Boot
Disable FRB2 Timer
Intel order number C77866-003
Intel® Server Board SE7520AF2 TPS
This node is grayed out if a user
password is not installed.
This node is grayed out if a user
password is not installed. This
node is hidden if the Intel
Management Module is not
present.
This node is grayed out if a user
password is not installed. This
node is hidden if the Intel
Management Module is not
present.
Help Text
Selects submenu.
Selects submenu.
Selects submenu.
Grayed out if "NMI on
SERR" is disabled.
"Last State" is only
displayed if the Intel
Management Module is
present. When displayed,
"Last State" is the
default.
When set to "Stays Off,"
"Power Switch Inhibit" is
disabled.
"Disable BSP" and "Do
not disable BSP" are only
displayed if the Intel
Management Module is
present.
Description
Revision 1.2