Integration And Usage Tips - Intel SE7520AF2 Technical Product Specification

Intel® Server Board SE7520AF2 TPS
This section provides a bullet list of useful information that is unique to the Intel® Server Board
SE7520AF2 and should be kept in mind while assembling and configuring your SE7520AF2
based server.
•
Only Intel® Xeon™ processors are supported on the Intel® Server Board SE7520AF2
• Processors must be populated in the sequential order; that is, socket CPU1must be
populated before socket CPU 2
• You do not need to populate a terminator in an unused processor socket
• The Intel® Server Board SE7520AF2 supports DDR2 400MHz SDRAM memory only.
Memory installation occurs in pairs of contiguous sockets (e.g. DIMM 1A and DIMM 1B).
Within each pair, the DIMMs need to be the same size and vendor. DIMM pair 1 is
located closest to the edge of board.
• When integrating the Intel® Server Board SE7520AF2 in the SC5300 server chassis,
users will be required to install additional standoffs and one bumper in the chassis base
plate. Refer to the Quick Start User's Guide for further details.
• The Intel® Server Board SE7520AF2 enables six (6) System Fan Headers: Sys Fan 1
through Sys Fan 6. Sys Fan3 and Sys Fan 4 are used when integrating the server board
in the SC5300 Base Chassis. Other system fans are available for reference chassis.
• When integrating the Intel® Server Board SE7520AF2 in the Intel® Server Chassis
SC5300, the system utilizes the 2U passive (no fan) heatsink solution of the Intel Xeon
processor.
Revision 1.2

Integration and Usage Tips

Intel order number C77866-003
Integration and Usage Tips
I