Related Manuals for Intel SR1400SYS - Server Platform - 0 MB RAM
Summary of Contents for Intel SR1400SYS - Server Platform - 0 MB RAM
- Page 1 ® Intel Server Board SE7520JR2 Intel® Server Chassis SR1400 Intel® Server Chassis SR1450 Intel® Server Chassis SR2400 Technical Specification Update December 2005 Enterprise Platforms & Services Division...
-
Page 2: Revision History
Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. -
Page 3: Table Of Contents
RAID configurations...................20 BIOS will display a warning message when the mBMC System Event Log (SEL) is full ID Button/LED functionality with no Intel Management Module (IMM) ....21 mBMC doesn't log the "AC Lost" event when AC power lost........21... - Page 4 Changing BIOS Setup options “Adjacent Cache Line Prefetch” and “'Hardware Prefetch” from factory defaults may alter system performance..........21 SR2400 PCI-X Riser Card Add-in Card Population Rules ........22 Required Steps When Installing an Intel Management Module (IMM) into a server22...
- Page 5 List of Tables List of Tables Table 1. Intel® Server Board SE7520JR2 SKUs .............7 Table 2. Intel® Server Board SE7520JR2 Integrated System SKUs .......7 Table 3. Document Notation ....................8 Table 4. Summary of Known Product Errata ..............8 Table 5. Summary of Planned Documentation Changes ..........9...
-
Page 6: Preface
Preface Preface This document is an update to the product definition specified in the Intel® Server Board SE7520JR2 Technical Product Specifications, Intel® Server Chassis SR1400 Technical Product Specifications, Intel® Server Chassis SR1450 Technical Product Specification, and the Intel® Server Chassis SR2400 Technical Product Specifications (Order Numbers C78844-002, C78846-001, D11535-001, and C78845- 001). -
Page 7: Product Scope
SE7520JR2ATAD1 Onboard SATA (RAID) + DDR – 266/333 MHz This document will also include errata and specification changes for the Intel® Server Chassis SR1400, Intel® Server Chassis SR1450, and Intel® Server Chassis SR2400, including the following Intel factory inegrated SKUs: Table 2. -
Page 8: Summary Tables
The following tables provide a summary of known errata and planned documentation changes for each of the following Intel products: Intel® Server Board SE7520JR2, Intel® Server Chassis SR1400, Intel® Server Chassis SR1450, and Intel® Server Chassis SR2400. Where possible, Intel will correct existing product errata with future product updates. -
Page 9: Table 5. Summary Of Planned Documentation Changes
Technical Specification Update Summary Tables Table 5. Summary of Planned Documentation Changes Plans Description of Documentation Change SATA drive activity LED is driven by both the backplane controller and the Hard Drives Incorrect description of 50-pin front panel connector as J1J2 Incorrect pin assignment for table 90 “OEM RMC Connector Pinout (J3B2)”... -
Page 10: Errata
Some RAID controllers fail to recognize their Option ROM access hot- key sequence needed to configure the card during POST Problem Intel has determined a BIOS issue where some RAID controllers may fail to recognize their Option ROM access hot-key sequence needed to configure the card during POST. -
Page 11: Platform Confidence Test (Pct) Reports Sio Error When No Floppy Drive Is Present11
PCT checks for the status of the floppy controller only assuming a floppy drive is present. This causes the SIO test module to fail. Until the new PCT is available, Intel recomends customers to disregard this error. Workaround Add a floppy drive to the system configuration to clear error. -
Page 12: Bmc Sel Timestamp Incorrect Information
Technical Specification Update Errata Status Fixed. Intel has corrected this issue with a change to the basedboard, which was implemented in October of 2004. For details, please reference Product Change Notification #104462. BMC SEL Timestamp Incorrect Information Problem The Intel® Server Board SE7520JR2 has been found to have a BIOS erratum which causes the BMC SEL timestamp information to be incorrect. -
Page 13: Lm93 Sensor Monitoring Issue
LM93 sensor monitoring issue Problem The Intel® Server Board SE7520JR2 has been found to have an issue where the LM93 monitoring chip is masking events generated by specific system sensors. This is happening because the LM93 part is operating in an S4/S5 sleep mode. -
Page 14: Cpu 2 Processor Fault Led Illuminated When No Processor Is Installed
SEL event generated for this fault indicator condition. Status Fix. Intel plans to correct this issue with a IMM BMC Firmware Update. All IMM BMC firmware release prior to and including rel 47 will have this issue. Silk screen for onboard SCSI Channels denote the internal SCSI connector as Channel A and the external SCSI connector as Channel B. - Page 15 Technical Specification Update Errata Implication The system status LED may be blinking green indicating a degraded system configuration that does not exist. Workaround None. Status Fixed. This issue has been corrected in FRUSDR 6.6.A and later.
-
Page 16: Documentation Changes
No drive activity will be displayed on the Activity LED if using older SATA drives. Status Doc. This will be added in a future release of Intel® Server Board SE7520JR2 TPS. Incorrect description of 50-pin front panel connector as J1J2 Problem Table 92, page 190 of Intel®... -
Page 17: Incorrect Measurement For Table 1 "Chassis Dimentions" On Tps
Documentation Changes Implication Misleading reference. Status Doc. This will be corrected in a future release of Intel® Server Board SE7520JR2 TPS. Incorrect measurement for table 1 “Chassis Dimentions” on TPS Problem Table 1, page XX of Intel® Server Chassis SR2400 Technilcal Product Specification (TPS) 1.1 shows inaccurate measurements for the chassis... - Page 18 Technical Specification Update Documentation Changes The expected error rates for DIMMs come from three sources: Intel experimental measurements, data from a memory component vendor, and the results from a 10 year study by a major computer manufacturer. The three respective error rates are all stated per GB of memory: 1.5 errors per year, about 1 error per month, and 4 per month.
- Page 19 LED activity indication to the hard drive carriers. This cable is not used with the SE7520JR2 onboard SATA controller. “ Implication The cable may be mis-used to connect the baseboard and the SATA backplane. Status Doc. This will be corrected in a future release of Intel® Server Chassis SR1450 User Guide.
-
Page 20: Fyi - Useful Information
Workaround For mirrored drives that will not hold the bootable operating system, create the RAID 1 configuration at the operating system level or use an Intel based RAID card for better performance. For mirrored drives that will hold the bootable operating system, configure the mirror using the CTRL-<C>... -
Page 21: Id Button/Led Functionality With No Intel Management Module (Imm)
Technical Specification Update FYI – Useful Information BIOS Setup (F2), SEL Viewer included on the Intel Server Deployment Toolkit + the Software Update Package), and Intel Server Management 8.x (ISM) which includes the capability to manually manage the SEL as well as the capability configure ISM to automatically clear the SEL when it reaches a user defined threshold. - Page 22 SR2400 PCI-X Riser Card Add-in Card Population Rules Description In order to maintain signal integrity of the PCI-X buses on the Intel Server Board SE7520JR2, add-in card population rules must be followed when using the Low Profile PCI-X Riser card and the Full Height PCI-X (Passive) Riser card for the Intel Server Chassis SR2400.