Intel® Server Board SE7520AF2 TPS
00150100
Multi-bit error occurred: forcing NMI
289
DIMM D?? is Disabled.
00150900
SERR/PERR Detected on PCI bus ( no source found )
00151100
MCA: Recoverable Error Detected Proc = ??
00151200
MCA: Unrecoverable Error Detected Proc = ??
00151300
MCA: Excessive Recoverable Errors Proc = ??
00151350
Processor MachineCheck Data a Bank = ?? APIC ID = ?? CR4 = ???? ????
00151351
Processor MachineCheck Data b Address = ???? ???? ???? ???? Time Stamp = ???? ????
???? ????
00151352
Processor MachineCheck Data b Status = ???? ???? ???? ????
00151500
Excessive Single Bit Errors Detected
00151720
Parity Error Detected on processor bus
00151730
IMB Parity/CRC Error
00151700
Started Hot Spare memory Copy. Failed row/rows = ?? and ?? copied to spare row/rows = ??
and ?? ( used on CMIC–HE box )
00151710
Completed Hot Spare memory Copy. Failed row/rows = ?? and ?? copied to spare row/rows =
?? and ?? ( used on CMIC–HE box )
7.3.4
Boot Block Error Beep Codes
Number of Beeps
1
2
3
4
5
6
7
8
9
10
11
12
13
1 long beep
7.3.5
POST Error Beep Codes
The following table lists POST error beep codes. Prior to system video initialization, BIOS uses
these beep codes to inform users on error conditions.
Revision 1.2
Table 106. Bootblock Error Beep Codes
Insert diskette in floppy drive A:
'AMIBOOT.ROM' file not found in root directory of diskette in A:
Base memory error
Flash Programming successful
Floppy read error
Keyboard controller BAT command failed
No Flash EPROM detected
Floppy controller failure
Boot Block BIOS checksum error
Flash Erase error
Flash Program error
'AMIBOOT.ROM' file size error
BIOS ROM image mismatch (file layout does not match image present in flash device)
Insert diskette with AMIBOOT.001 File for Multi-Disk Recovery
Table 107. POST Error Beep Codes
Intel order number C77866-003
Error Reporting and Handling
DIMM = ?? DIMM = ?? ( could not isolate)
Description
215