Intel SE7520AF2 Technical Product Specification page 97

Intel® Server Board SE7520AF2 TPS
Initialization – The Initialize option initializes the selected logical drive by writing zeroes to the
entire volume. You should initialize each new logical drive that you configure.
Warning: Initializing a logical drive deletes all information on the physical drives that compose
the logical drive.
Check Consistency – This option verifies the correctness of the redundancy data and is
available for arrays using RAID 1, 5, 10, or 50. If a difference in the data is found, BIOS Console
assumes that the data is accurate and automatically corrects the parity value.
Properties – Through the Properties option you can:
Display the logical drive properties (such as RAID level, logical drive size, and stripe
size)
Display the read, write, and I/O policies
Change the read, write, and I/O policies
Start initialization
Start a consistency check
4.7.3.5 Physical Drives Screen
This screen displays the physical drives for each channel or port. From this screen, you can
rebuild the physical arrays or view the properties for the physical drive you select. Press Reset
to return to the configuration that existed before you made any changes.
4.7.3.6 Configuration Wizard Screen
This option enables you to clear a configuration, create a new configuration, or add a
configuration. The "Detailed Configuration Instructions" section provides detailed steps for using
the Configuration Wizard.
4.7.3.7 Adapter Selection
This option allows you to choose an Intel RAID adapter installed in the system.
Revision 1.2
Integrated Intel® RAID Controller SROMBU42E
Intel order number C77866-003
97