Step 3: Connect The Ethernet Cable; Step 4: Connect The Monitor - Lorex LHD100 SERIES Instruction Manual

Step 3: Connect the Ethernet Cable

• Connect an ethernet cable (included) to the ETHERNET port on the rear panel of the DVR.
Connect the other end of the ethernet cable to a router on your network.

Step 4: Connect the Monitor

• Connect a HDMI cable (included) from the HDMI port to the TV or monitor (recommended) OR;
• Connect a VGA cable (not included) from the VGA port to the monitor.
NOTE: The DVR cannot use an HDMI and VGA monitor at the same time.
NOTE: If you have a monitor with a DVI input, you must use an HDMI to DVI adapter (not included).
You cannot use an DVI to VGA adapter.
VGA
ETHERNET port
Connect ethernet cable
HDMI
Basic Setup
7