Table of Contents
Advertisement
Appendix B: Connecting a PTZ Camera
Advanced PTZ Controls
Use the Advanced PTZ controls to configure PTZ presets, adjust the camera speed and
start PTZ tours.
Go to selected
preset
PTZ Presets
You can configure up to 15 presets for the camera. Presets can be used to configure
customized PTZ tours, which allow the camera to automatically switch between presets
every few seconds. The camera can also be set to go to a preset when an alarm occurs (e.g.
when the camera detects motion).
You cannot delete presets; you must overwrite the preset with new settings to delete it.
Creating PTZ Presets
1
In the Advanced PTZ Controls, click Preset and select the number of the preset to configure.
Click Save & Exit to confirm selection.
132
Select PTZ camera to configure
Select camera speed
Select active PTZ tour
Directional controls
Tele: Zoom In / Wide: Zoom Out
Adjust Focus
Select Preset to configure
Save current position as preset
Adjust the
camera position
Select the preset to configure
Click Set to save preset
Advertisement
Table of Contents
