Table of Contents
Advertisement
3
Double-click under Buzzer for the channel you want to change and select On to enable the
Event Buzzer.
4
Click Save to save your changes and click Exit to return to Live Viewing mode.
Enabling Full-screen Popup on Events
When Full-screen Popup is enabled, channels will popup in full-screen when events occur.
To enable Full-screen Popup:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
2
Select the Alarm tab.
3
Double-click under Popup on the channel you would like to change and select On to enable
Full-screen Popup.
4
Click Save to save your changes and click Exit to return to Live Viewing mode.
Configuring Alarm Durations
The Post Alarm duration determines the amount of time the DVR records after events
occur. The Pre Alarm setting enables the DVR to save footage for a short duration before
the event occurs.
To configure the Post Alarm duration:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
Double-click under Popup
and select On to enable the
Full-screen Popup
Click Save
Setup
41
Advertisement
Table of Contents
