Table of Contents
Advertisement
To enable Auto Reboot:
1
Right-click to open the Main Menu, click Setup then Time. Select the Auto Reboot tab.
2
Under Auto Reboot, select On to turn on Auto Reboot.
3
Under Time, select the hour you would like the DVR to restart at.
4
Under Repeat, select Every Day to have the DVR restart daily, or select which day of the week
you would like the DVR to restart on.
5
Click Save to save your changes. Click Exit to return to Live Viewing mode.
Camera
Configure camera titles and settings.
To configure PTZ cameras (not included), see "Appendix B: Connecting a PTZ Camera" on
page 130.
Disconnecting/Connecting Cameras
When cameras are connected to the DVR, they are automatically connected to the system.
When camera cables are disconnected, a Video Loss icon is shown. To hide the Video Loss
icon, you must disconnect the cameras in the Camera tab.
If a connected camera is not appearing on screen, check the Camera tab to ensure that it
is connected. Also check under Live Covert and ensure it is set to Off.
To disconnect/connect cameras:
1
Right-click to open the Main Menu, and click Setup then Camera.
2
Select the Camera tab.
3
Under Connect next to the channel you want to configure, select Off to disconnect the camera
or On to connect the camera.
4
Click Save to save your changes and click Exit to return to Live Viewing mode.
Select On
Select the time for reboot
Select Every Day to reboot daily
or select the time of the day the
DVR will reboot on
Click Save
Setup
31
Advertisement
Table of Contents
