Table of Contents
Advertisement
Setup
Enabling Sensor Events
Sensor Events trigger recording when an external sensor device (not included) is
triggered.
To enable sensor events:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
2
Select the Event tab.
3
Under the channel you want to enable sensor events on, double click under Sensor and
select On to turn on Sensor Events.
Click Save to save your changes and click Exit to return to Live Viewing mode.
Enabling Audio Events (4-Channel Only)
You must enable audio events for each channel before the DVR will save audio events.
Audio-enabled cameras (not included) or self-powered microphones (not included) are
required to use Audio Events
To enable audio events:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
2
Select the Event tab.
38
Double-click to
select On to turn
on Sensor Events
Click Save
Double-click to
select On to turn
on audio events
Click Save
Advertisement
Table of Contents
