Basic Setup; Connect The Bnc Cameras; Connect The Mouse; Connect The Ethernet Cable - Lorex LH600 SERIES Instruction Manual

BASIC SETUP

Power Connection
Ethernet Port

1. CONNECT THE BNC CAMERAS

• Connect the BNC cameras to the BNC ports on the rear panel of the system.

2. CONNECT THE MOUSE

• Connect a USB mouse to the USB port on the rear panel of the system.

3. CONNECT THE ETHERNET CABLE

• Connect the ethernet cable to the ethernet port on the rear panel of the system.
2
BNC Camera connection
BNC Port
USB Port
Ethernet Port
DVI Connection
USB Mouse connection
PAL/NTSC Switch