Table of Contents
Advertisement
Configuring Daylight Savings Time (DST)
If your region observes Daylight Savings Time (DST), follow the instructions below to
configure your DVR to automatically update the time when the clock updates.
To enable automatic DST adjustments:
1
In Live Viewing mode, right-click on the screen and click Setup.
2
Click Time and select the Time Zone tab.
3
Click the field next to Time Zone and select your time zone.
4
Click the field next to Daylight Saving Time and select On.
• If you need to change the date and time that Daylight Savings starts and ends, click the fields
next to Start Time and End Time. Make any required changes and click Save.
5
Click Save to save your changes and click Exit return to Live Viewing mode.
Select your time zone
Select On
Configure a custom start
and end time for Daylight
Savings if needed
Click Save
20
Advertisement
Table of Contents
