Calendar Search
Calendar Search allows you to select recorded video based on the date and time.
1
2
3
1
Calendar: Click the arrows to select a month. Double-click dates to select the date. Dates
with recorded video have a green corner.
2
Hour: Double-click hours to select them. Hours with continuously recorded video have a
green corner. Hours where events occurred have colors based on the event type.
3
Recording Grid: Left column shows channels, hours, or days based on the Multi Mode
selected. Grid shows if video is available for minutes in the selected hour or hours.
• Click inside the recording grid to change the playback time. Double-click to start playback.
4
Search Options:
• Time Index: Only applies if the time has been changed. When the time is changed, all videos
saved up until the change occurs are saved in a folder according to an old time index. Click
to select the Current time index or an old time index.
• Event: Select an event type (Motion, Sensor, or Audio) to display on the grid, or select All to
show all recordings on the grid.
NOTE: Audio events are not supported on 8-channel models.
• Multi-Mode: Select the grid display mode. Multi Channel (default) shows video from
multiple-channels in the grid. Multi Time shows video from the same channel from different
hours in the grid.
• Channel: Select the channel when Multi Time or Multi Day is selected.
5
List All: Lists all videos saved on the DVR by hour.
6
Playback: Start playback at the selected time, using the search options chosen.
7
Backup: Opens the Backup window. See "Backup" on page 62.
8
Exit: Close the Calendar Search window.
5
6
7
4
8
Search
61