Setting Motion Detection Sensitivity; Setting Sensitivity For Audio Events (4-Channel Only) - Lorex LHD100 SERIES Instruction Manual

4 Click Save to save your changes then click Exit to return to Live Viewing.

Setting Motion Detection Sensitivity

Motion Sensitivity determines how easily motion detection events are triggered. Higher
Motion Sensitivity means that less motion is required to trigger a motion event.
Motion Sensitivity must be configured for each camera, and motion events must be enabled
in the Recording Menu before the DVR will record for these events.
To change Motion Sensitivity:
1 From Live Viewing mode, right-click to enter the Main Menu and select Setup. Click Camera
and select the Event Source tab.
Double-click
to change the
Motion
Sensitivity
2 Double-click under Motion Sensitivity for each camera to set the motion detection sensitivity.
3 Click Save to save your changes and click Exit to return to Live Viewing mode.

Setting Sensitivity for Audio Events (4-Channel Only)

Sound Sensitivity determines how easily audio events are triggered. Higher Sound
Sensitivity means quieter sounds will trigger audio events.
NOTE: Audio events are not supported on 8-channel models.
Sound Sensitivity must be configured for each camera, and audio events must be enabled
in the Recording Menu before the DVR will record for these events.
33