Table of Contents
Advertisement
Setup
To change the recording frame rate:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
2
Select the Recording tab.
3
Double-click under Continuous Speed for the channel you want to change and select the
frame rate for continuous recording. Select Off to disable continuous recording.
4
Double-click under Event Speed for the channel you want to change and select the frame
rate for event recording. Select Off to disable event recording.
NOTE: The overall frame rate for recording is limited. If you exceed the available frame rate,
the DVR will automatically adjust the frame rate for other channels.
5
Click Save to save your changes and click Exit to return to Live Viewing mode.
Enabling the Event Buzzer
When the Event Buzzer is enabled, the DVR will beep when events occur.
To enable the Event Buzzer:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Recording.
2
Select the Alarm tab.
40
Double-click to select event
recording frame rate
Double-click to select the
continuous recording frame rate
Click Save
Double-click under Buzzer and
select ON to enable the event buzzer
Click Save
Advertisement
Table of Contents
