Table of Contents
Advertisement
8
DOWN / UP:
Press to switch to the next/previous
page in the log.
9
RECORD: Press to stop/resume recording on all
channels. Admin password required.
10
COPY: Press to open the Backup Menu. See
"Backup" on page 62.
11
ESC: Exit menus or Playback Mode.
12
SEARCH: Open the Search Menu. See "Search"
on page 60.
13
PTZ: Press to open PTZ controls (PTZ camera
required; not included).
Changing the Remote Control ID
(8-Channel Only)
The remote control ID allows you to pair the DVR
to a particular remote control. This is useful if you
have more than one DVR.
To pair the remote control to the DVR:
1
From Live Viewing mode, right-click to open the
Main Menu. Click Setup then System.
2
Click ID for Remote Controller. Enter a unique ID
number for the DVR, and then click Save & Exit.
3
Click Save to save changes. Click Exit to return to Live Viewing mode.
4
On the remote control, press ID. Then enter the ID you created as a 2 digit number (e.g. if the
ID is "5," enter "05." Then press ID again. The remote control will now be paired to the DVR.
Press ID, then the 2 digit ID number, then press ID again
1
2
3
4
5
6
7
8
Click and enter a
unique ID number
Remote Control
9
10
11
12
13
15
Advertisement
Table of Contents
