Setup
• Interval: Enter the interval the DVR waits before sending a new email notification.
NOTE: The DVR will only send 1 email attachment per event, and the interval is only reset when
the event ends.
2
Click Save to save your changes. Click Exit to return to Live Viewing.
To use a custom email server:
1
Click Relay SMTP and select Custom. Enter the server address and click Save & Exit to
confirm.
2
Under SMTP Port, enter the server SMTP port number and click Save & Exit to confirm.
3
Configure the following:
• Sender Email: Enter the sender email address.
• Sender Password: Enter the password for the sender email account.
• Receiver Email: Enter up to 5 email addresses to receive email notifications. Check Receiver
Email next to any receiver addresses you want to enable.
• Interval: Enter the interval the DVR waits before sending a new email notification.
NOTE: The DVR will only send 1 email attachment per event, and the interval is only reset when
the event ends.
4
Click Save to save your changes. Click Exit to return to Live Viewing.
Configuring Bandwidth (Dual Streaming) Settings
Bandwidth settings allow you to configure the video streaming quality and bandwidth
settings for connections over a local area network or the Internet.
To configure bandwidth settings:
1
From Live Viewing mode, right-click to open the Main Menu. Click Setup then Network.
2
Select the Bandwidth tab.
54
Select streaming resolution
Select streaming image quality